Filter
Top Products
94
You can configure a VNC (Virtual Network Computing) endpoint on the MCU by choosing .
This makes it easier to add a VNC session to conferences because you can choose its name from a list rather than type
its network address.
You can add VNC endpoints to the MCU. This enables you to have software applications running on a remote
computer added to a conference. For example, if a speaker has a set of slides to present during a conference, you can
add them as a VNC endpoint. After entering the settings, click .
The name of the computer used for the VNC
application (VNC endpoint).
The IP address or host name of the computer
used for the VNC application (VNC endpoint).
The port used for communication to the VNC
endpoint.
The VNC server password for the computer
you're trying to view.
Re-enter the VNC password.
When a participant disconnects from a
conference and only endpoints set to Automatic
disconnection are left, all those participants are
disconnected.
Set to enabled if you want this endpoint to be
automatically disconnected from conferences
when only endpoints set to Automatic disconnection
remain in a conference when any other
participant has disconnected.