Filter
Top Products
93
seen in the conference, but does not want to
contribute verbally. You can mute both audio and
video if required. This can be altered during the
course of the conference by going to
and clicking on the name of a conference and
altering this participant's settings.
Set the initial video status of an endpoint to be
either active or muted.
If set to muted, when the endpoint joins a
conference, it will not be able to contribute video
to the conference. For example, you can mute
video from an endpoint if somebody wants to see
the conference, but not be seen themselves. You
can mute both audio and video if required. This
can be altered during the course of the
conference by going to and clicking
on the name of a conference and altering this
participant's settings.
When a participant disconnects from a
conference and only endpoints set to Automatic
disconnection are left, all those participants are
disconnected.
Set to enabled if you want this endpoint to be
automatically disconnected from conferences
when only endpoints set to Automatic disconnection
remain in a conference when any other
participant has disconnected.
Can be used to ensure only specific codecs are
permitted on calls to (and received from) this
endpoint.
If Enabled, you can choose which codecs are
allowed to be used when communicating with
this endpoint. When enabled, this setting
overrides the unit-wide codec selection on the
page.