Filter
Top Products
89
to the conference. For example, you can mute
video from an endpoint if somebody wants to see
the conference, but not be seen themselves. You
can mute both audio and video if required. This
can be altered during the course of the
conference by going to and clicking
on the name of a conference and altering this
participant's settings.
When a participant disconnects from a
conference and only endpoints set to Automatic
disconnection are left, all those participants are
disconnected.
Set to enabled if you want this endpoint to be
automatically disconnected from conferences
when only endpoints set to Automatic disconnection
remain in a conference when any other
participant has disconnected.
Note that this setting is useful where you have
configured a Codian IP VCR as an endpoint so
that the IP VCR can be automatically called into a
conference to record the session. In this case, the
IP VCR will stop recording when the conference
ends (that is, when everyone has left the
conference). For more information about using
the IP VCR in this way, refer to the IP VCR
online help.
Can be used to ensure only specific codecs are
permitted on calls to (and received from) this
endpoint.
If Enabled, you can choose which codecs are
allowed to be used when communicating with
this endpoint. When enabled this setting
overrides the unit-wide codec selection on the
page.