Filter
Top Products
6
Using Color
6-22
Phaser 240 Drivers and Utilities
Before printing the PANTONE Color chart
The PANTONE-Tek Phaser 240 (PANT240.PS) file prints a PANTONE Color
sampler chart (about 46 pages in length). Use the chart to select colors
within an application that allows you to specify PANTONE Colors.
Note
Do not use any color corrections in a driver or with a
downloadable utility file when printing PANTONE Colors from
an application. Using any color correction will cause PANTONE
Colors to print incorrectly.
The PANTONE Color sampler chart file contains specific color correction
and print quality information required for printing the chart. To match
colors from within an application to the sampler chart, you must use the
following options:
Color correction None
Select color corrections in a Tektronix Phaser 240
driver or with downloadable utility files; see page 6-5
for more information.
Print quality High Resolution
(You can use Enhanced quality if your printer doesn’t
have the required memory upgrade for High
Resolution, however, colors may not match
PANTONE Color standards.)
Select print quality modes in a Tektronix Phaser 240
driver or with downloadable utility files; see page 5-8
for more information.
Paper Thermal-transfer coated paper only.
Transfer Roll 3-Color thermal-wax transfer roll only.
(Do not use a ColorCoat transfer roll.)