Filter
Top Products
Getting Set Up
2
User Manual
2-19
Connecting the power and turning on the printer
After you have connected all the interface cables, you are ready to connect
the power cord and turn on the printer.
Caution
To avoid damaging the printer, make sure that the voltage
select switch is set to match the AC line voltage for your
location and that the power switch is in the off position before
connecting the power cord.
If you move the printer to a location that uses a line voltage other than the
printer’s current setting, refer to “Changing the line voltage” on page C-1 for
information on changing the line voltage selection switch.
1.
Plug the power cord into the printer and into a grounded outlet.
2.
Turn on the printer.
9238-17
1
1
POWER
OFF ON
2