Filter
Top Products
Getting Set Up
2
User Manual
2-35
Turning on and off the startup page
You can enable and disable the startup page by sending utility files from the
printer’s utilities diskette to the printer. For details on controlling the
startup page, refer to the Phaser 240 Drivers and Utilities Printing Reference.
Even when the startup page is enabled, you can still keep it from printing by
removing the paper tray(s) at power-up. Put the paper tray(s) back in after
the READY light stops blinking.
What next?
■ Once you have set up all the hardware and connectors, installed
any options, installed the software on your computer, and turned
on the power, you are ready to print. Chapter 3, “Printing,”
contains useful information on printing features such as color
corrections, fonts, and printing hints. For detailed information on
printing options, refer to Phaser 240 Drivers and Utilities Printing
Reference.