Filter
Top Products
Getting Set Up
2
User Manual
2-31
Installing the Phaser 240 GX driver
1.
Make sure that your Macintosh is turned on with QuickDraw GX
and System Software version 7.5 installed.
2.
Insert the Macintosh Driver and Printer Utilities diskette into the
disk drive.
3.
When the diskette appears on the desktop, it should be open,
showing the icons inside.
4.
Drag the Phaser 240 GX driver icon from the diskette to the closed
System Folder icon on your Macintosh hard disk. At the alert
message, click OK to automatically install the driver in the
Extensions folder.
5.
Select Chooser from the Apple menu.
6.
Click the Phaser 240 GX printer driver icon on the left side of the
Chooser. A list appears with the printers you have connected to
your Macintosh or printers that are available on a network. (If the
printer driver icon does not appear, Restart your Macintosh, and
repeat the printer driver installation procedure; also check the
cable connections on your computer and printer.)
7.
In the Connect via field’s pop-up menu, select your printer’s
communication method:
■ The AppleTalk option is the standard network connection.
■ The Servers option is used to select a shared desktop printer. See
the Phaser 240 Drivers and Utilities Printing Reference for details.