Filter
Top Products
5
Selecting Media and Image Options
5-6
Phaser 240 Drivers and Utilities
Selecting media trays
If your printer has the optional lower tray assembly, use one of the methods
in the following table to select a media tray.
The Phaser 240 printer comes standard with one perforated-paper tray for
metric or U.S. paper sizes. A lower tray assembly can be added and other
tray types can be used (call the Tektronix Graphics Supplies Order Desk at
1-800-835-6100).
Note
Selecting a tray from a driver overrides a downloaded utility file
for prints made from the driver.
■ Upper Tray
Paper or transparency film is automatically loaded from the upper
tray. The printer picks media from the upper tray until the tray is
empty. When the tray is empty, printing stops until the tray is
refilled. Use this selection if you use different media in each tray.
■ Lower Tray
Paper or transparency film is automatically loaded from the lower
tray. The printer picks media from the lower tray until the tray is
empty. When the tray is empty, printing stops until the tray is
refilled. Use this selection if you use different media in each tray.
■ Auto Select
If both trays contain the same size and type of media, media is
automatically loaded first from the lower tray, and then from the
upper tray when the lower tray is empty. Use this selection if you
have the same size and type of media in both trays.
Options Tektronix
driver settings
Downloadable
utility files
Use the upper media tray
✔
✔
Use the lower media tray ✔ ✔
Automatically switch between media trays ✔ ✔