Filter
Top Products
B
Modifying Printer Operations
B-2
Phaser 240 Drivers and Utilities
Enabling and disabling the startup page
Note
If you are using a Macintosh with QuickDraw GX and System
Software 7.5, you can use the Tektronix Phaser 240 GX driver to
print a copy of the startup page without turning the printer off
and on. Refer to page A-11 for instructions.
You can choose to have a startup page print each time the printer is turned
on or reset, or you can disable the startup page.
Use the files for your computer type.
Macintosh users
1.
Follow the instructions on page 2-13 to decompress the Phaser 240
Utilities.sea archive file on the Macintosh Driver and Printer
Utilities diskette to your computer’s hard disk.
2.
Select the appropriate printer in the Chooser.
3.
Locate the LaserWriter Utility in the folder on your hard disk
containing decompressed utility files.
4.
Double–click the LaserWriter Utility icon to start the application.
5.
Choose Set Startup Page from the Utilities menu.
6.
Select either the on or off button, then click OK.
Macintosh file name PC file name
LaserWriter Utility NOSTRTPG.PS
STARTPG.PS