Filter
Top Products
Getting Set Up
2
User Manual
2-29
Installing the Phaser 240 driver
1.
Make sure that your Macintosh is turned on with System Software
version 6.0.7, 7.0 or later installed.
2.
Insert the Macintosh Driver and Printer Utilities diskette into the
disk drive. When the diskette appears on the desktop, it should be
open, showing the icons inside.
3.
Drag the Phaser 240 driver icon from the diskette to the closed
System Folder icon on your Macintosh hard disk.
■ System 7.0 and later users: at the alert message, click OK to
automatically install the driver in the Extensions folder.
■ System 6.0.7 users: the driver is installed in the System Folder.
4.
System 6.0.7 users: LaserWriter 7.1.2 software is required to use
the Tektronix driver with system 6.0.7. If you need this software,
do the following steps:
a.
Open the Old System Items folder on the Macintosh Driver and
Printer Utilities diskette.
b.
Drag the Backgrounder V1.3 and PrintMonitor V7.0 from the
diskette to the closed System Folder icon on your Macintosh
hard disk. At the alert message, click OK to automatically
install these items in their proper places.
c.
Restart your Macintosh to activate the software.
5.
Select Chooser from the Apple menu.