Filter
Top Products
A
Using the Phaser 240 GX Driver
A-20
Phaser 240 Drivers and Utilities
Printing from non-QuickDraw GX-aware applications
If you are using non-QuickDraw GX applications with the Phaser 240 GX
driver, the Page Setup and Print dialog boxes look similar to the standard
LaserWriter 7.1.2 dialog boxes described in Chapter 2. However, unlike the
dialog boxes described in Chapter 2, these dialog boxes have no
printer-specific options, such as TekColor color corrections. These dialog
boxes reflect the selections made in the default desktop printer. You cannot
change these printer settings from an application, but you can change them
by selecting (highlighting) the default desktop printer and using the Printer
Driver Defaults command in the Printing menu. You can also change the
default desktop printer before you change printing selections; see page A-8
for instructions.
Changing a desktop printer’s default selections
1.
Click to highlight the default desktop printer.
2.
From the Printing menu, select Printer Driver Defaults.
The following dialog box appears:
3.
Make desired printer selections, then click OK.
4.
Return to your application.