Filter
Top Products
Printing
3
User Manual
3-3
Printing from a PC (DOS)
1.
In your application software, set up the printing options for a
color printer driver. For more information on making these
selections, refer to your application software’s user manual.
2.
Make sure that the PC communication ports have been set up
correctly. Refer to “Setting up PC ports (DOS)” on page 2-34 for
instructions.
3.
Select the printer driver for the Phaser 240, a Tektronix Phaser
printer, or a generic color PostScript driver.
Note
Generic PostScript printer drivers do not have information about
your Phaser 240 printer, for example, its page sizes and its image
area size. Using a standard Letter- or A4-size media selection
should produce acceptable results.
a.
Select the appropriate port (an LPT port for parallel or one of
the network connections).
b.
Set the page margins in your application software as needed.
For details on the printer's paper and margin sizes, refer to
“Margins and print area” on page 3-9.
4.
Execute the application software's print command. Refer to the
application software's user manual for details.