Filter
Top Products
Troubleshooting
7
User Manual
7-35
Fonts printing incorrectly from Windows
If fonts are printing incorrectly from Windows, make sure that you installed
the correct printer with the supported driver.
■
If you have the standard printer configuration, you should have
installed
Tektronix Phaser 560
.
■
If you have the printer’s Extended Features option with the
additional fonts, you should have installed
Tektronix Phaser 560
with Extended Features
so that Windows recognizes and uses all
the printer’s 39 fonts.
Note
If you select
Tektronix Phaser 560 with Extended Features
and you have only the standard printer configuration with 17
fonts, any of the additional fonts selected within an application
are printed in the Courier typeface.
Getting printer configuration information
If you are not sure which printer configuration you have, print the
Configuration Page from the printer’s front panel; they list the amount of
memory installed and whether your printer has the Standard or Extended
configuration. Refer to “Printing Help Pages” on page 8-8 for instructions.
Refer to “PC/Windows software” on page 3-1 for instructions on installing
the printer and drivers.