Filter
Top Products
4
Printing Basics
4-4
Phaser 560 Color Laser Printer
Using the AdobePS 4 driver with Windows 95
To select printing options in the
AdobePS 4 driver
, follow these steps:
1.
In the
Printers
window, click the
Phaser 560
printer icon with the right mouse button, then select
Properties
from the menu.
2.
Click the following tabs to see printing options; refer to your Windows 95 documentation for more
information on tabs and options.
Details
For timeout settings and other options
■
Set the
Timeout
settings. Refer to “Setting the timeouts” on page 4-11 for instructions.
Under
PostScript Timeout
values, leave
Job Timeout
set to
0
. Set
WaitTimeout
to the default,
240
(4 minutes). Setting it higher ensures that you will not lose a multi-page job due to a timeout after
the
Transmission Retry
alert message is displayed.
Paper
For media options (sizes, types, and source)
Graphics
For graphics options
■
Refer to the on-line manuals on the printer’s CD-ROM for more information on host color
correction.
Note
Use the
Print Quality
selections in the
Device Options
tab instead of the
Resolution Options
in
the
Graphics
tab.
Device Options
For printer-specific options (color corrections)
■
Select
Installed
for the optional Lower Tray Assembly if your printer has this accessory. You must
make this selection for the optional media trays to be available under the
Paper
tab.
■
Refer to the on-line manuals on the printer’s CD-ROM for more information on host
color correction.