Filter
Top Products
www.ti.com
MSP-TS430PZ100A
Table B-23. MSP-TS430PZ100A Bill of Materials
No. per
Pos. Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2 0 12pF, SMD0805 DNP
DNP: Only
1b C3, C4 0 47pF, SMD0805 recommendation. Check
your crystal spec.
2 C7, C9 2 10uF/10V, Tantal Size B 511-1463-2-ND
C5, C11,
3 3 100nF, SMD0805 311-1245-2-ND
C14
4 C8 1 10nF, SMD0805 478-1358-1-ND
5 C6 0 470nF, SMD0805 478-1403-2-ND DNP
6 D1 1 green LED, SMD0805 67-1553-1-ND
DNP: Headers and
receptacles enclosed with
J1, J2, J3, SAM1029-25-NDSAM1213-
7 0 25-pin header, TH kit.Keep vias free of
J4 25-ND
solder.: Header:
Receptacle
8 J5 1 3-pin header, male, TH SAM1035-03-ND
10 JP1, JP2 2 2-pin header, male, TH SAM1035-02-ND pPlace jumper on header
11 JP3 1 3-pin header, male, TH SAM1035-03-ND Place jumper on pins 1-2
12 3 Jumper 15-38-1024-ND Place on: JP1, JP2, JP3
13 JTAG 1 14-pin connector, male, TH HRP14H-ND
DNP: Keep vias free of
14 BOOTST 0 10-pin connector, male, TH
solder
Q1: Micro Crystal
DNP: Keep vias free of
15 Q1, Q2 0 Crystal MS1V-T1K 32.768kHz,
solder
C(Load) = 12.5pF
16 R3 1 330 Ω, SMD0805 541-330ATR-ND
R1, R2, R4,
R6, R7, R8, DNP: R4, R6, R7, R8, R9,
17 2 0 Ω, SMD0805 541-000ATR-ND
R9, R10, R10, R11, R12
R11, R12
18 R5 1 47k Ω, SMD0805 541-47000ATR-ND
19 U1 1 Socket: IC357-1004-53N Manuf.: Yamaichi
20 PCB 1 90 x 82 mm 4 layers
Rubber Apply to corners at bottom
21 4 Select appropriate
standoff side
DNP: Enclosed with kit
22 MSP430 2 MSP430F5438IPZ
supplied by TI
101
SLAU278F–May 2009–Revised December 2010 Hardware
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated