Filter
Top Products
MSP-TS430PW28A
www.ti.com
Table B-8. MSP-TS430PW28A Bill of Materials
No. per
Position Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2 0 12pF, SMD0805 DNP
2 C5 1 2.2nF, SMD0805
3 C3 1 10uF/10V, SMD0805
4 C4, C6, 2 100nF, SMD0805 478-3351-2-ND
5 D1 1 green LED, SMD0805 P516TR-ND
DNP: Headers and receptacles
6 J1, J2 0 14-pin header, TH enclosed with kit. Keep vias free of
solder: (Header & Receptacle)
J5, JP1,
JP4, JP5, Place jumper on 1-2 of JP4-JP9
7 8 3-pin header, male, TH SAM1035-03-ND
JP6, JP7, Place on 1-2 on JP1
JP8, JP9
8 JP2, JP3 2 2-pin header, male, TH SAM1035-02-ND Place jumper on header
9 9 Jumper 15-38-1024-ND see Pos 7 an 8
14-pin connector, male,
10 JTAG 1 HRP14H-ND
TH
11 BOOTST 0 DNP Keep vias free of solder
Micro Crystal MS3V
12 Q1 0 Crystal 32.768kHz, C(Load) = DNP: keep vias free of solder
12.5pF
13 R1, R7 2 330 Ω, SMD0805 541-330ATR-ND
R2, R3,R5,
14 0 0 Ohm, SMD0805 541-000ATR-ND DNP R2, R3,R5, R6
R6,
15 R4 1 47k Ω, SMD0805 541-47000ATR-ND
16 U1 1 Socket: OTS-28-0.65-01 Manuf.: Enplas
17 PCB 1 63.5 x 64.8 mm 2 layers
Adhesive about 6mm width, 2mm e.g., 3M Bumpons Part
18 4 Apply to corners at bottom side
plastic feet height No. SJ-5302
19 MSP430 2 MSP430G2553IPW28 DNP: enclosed with kit, supplied by TI
54
Hardware SLAU278F–May 2009–Revised December 2010
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated