Filter
Top Products
MSP-TS430PW14
www.ti.com
Table B-1. MSP-TS430PW14 Bill of Materials
No. per
Position Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2 0 12pF, SMD0805 DNP
2 C7 1 10uF/10V, Tantal Size B 511-1463-2-ND
3 C3, C5 1 100nF, SMD0805 478-3351-2-ND DNP: C3
4 C8 0 2.2nF, SMD0805 DNP
5 D1 1 green LED, SMD0603 475-1056-2-ND
DNP: Headers and receptacles
"SAM1029-07-
6 J1, J2 0 7-pin header, TH enclosed with kit. Keep vias free of
NDSAM1213-07-ND"
solder: Header: Receptacle
J3, J5, J7,
Place jumpers on headers J5, J7, J8,
7 J8, J9, J10, 8 3-pin header, male, TH SAM1035-03-ND
J9, J10, J11, J12; Pos 1-2
J11, J12
8 J4, J6 2 2-pin header, male, TH SAM1035-02-ND Place jumper on header
9 9 Jumper 15-38-1024-ND Place on: J5, J7-J12; Pos 1-2
14-pin connector, male,
10 JTAG 1 HRP14H-ND
TH
Micro Crystal MS1V-T1K
12 Q1 0 Crystal 32.768kHz, C(Load) = DNP: keep vias free of solder
12.5pF
13 R2, R3 2 330 Ω, SMD0805 541-330ATR-ND
15 R5 1 47k Ω, SMD0805 541-47000ATR-ND
16 U1 1 Socket: OTS-14-0.65-01 Manuf.: Enplas
17 PCB 1 56 x 53 mm 2 layers
Adhesive about 6mm width, 2mm e.g., 3M Bumpons Part
18 4 Apply to corners at bottom side
plastic feet height No. SJ-5302
19 MSP430 2 MSP430F2013IPW DNP: enclosed with kit, supplied by TI
36
Hardware SLAU278F–May 2009–Revised December 2010
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated