Filter
Top Products
MSP-TS430RHA40A
www.ti.com
Table B-12. MSP-TS430RHA40A Bill of Materials
No. per
Position Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2 0 12pF, SMD0805 DNP: C1, C2
2 C5 0 2.2nF, SMD0805 DNP C12
3 C3, C7 2 10uF/10V, SMD0805 5 DNP C11
4 C4, C6 2 100nF, SMD0805 478-3351-2-ND
5 C9 1 470nF, SMD0805
6 D1 1 green LED, SMD0805 P516TR-ND
DNP: headers and receptacles
J1, J2, J3,
7 4 10-pin header, TH enclosed with kit. Keep vias free of
J4
solder. : Header : Receptacle
DNP: headers and receptacles
7.1 4 10-pin header, TH enclosed with kit. Keep vias free of
solder. : Header : Receptacle
J5, JP1,
JP4, JP5, Place jumper on 1-2 of JP4-JP9;
8 8 3-pin header, male, TH SAM1035-03-ND
JP6, JP7, Place on 1-2 on JP1
JP8, JP9
9 JP2, JP3 2 2-pin header, male, TH SAM1035-02-ND place jumper on header
10 9 Jumper 15-38-1024-ND see Pos 8 an 9
14-pin connector, male,
11 JTAG 1 HRP14H-ND
TH
10-pin connector, male,
12 BOOTST 0 DNP. Keep vias free of solder
TH
13 U1 1 Socket: QFN-40B-0.5-01 Manuf.: Enplas
Micro Crystal MS3V-T1R
14 Q1 0 Crystal 32.768kHz, C(Load) = DNP: Q1. Keep vias free of solder
12.5pF
15 R1,R7 2 330R SMD0805 541-330ATR-ND
R2, R3,
16 R5, R6, 2 0 Ohm, SMD0805 541-000ATR-ND DNP:R2, R3, R5, R6
R8, R9,
17 R4 1 47k SMD0805
18 PCB 1 79 x 66 mm 2 layers
Rubber select appropriate; e.g.,
19 4 apply to corners at bottom side
stand off Buerklin: 20H1724
DNP: enclosed with kit. Is supplied by
20 MSP430 2 MSP430N5736IRHA
TI
66
Hardware SLAU278F–May 2009–Revised December 2010
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated