MSP-TS430PZ100B
www.ti.com
Table B-24. MSP-TS430PZ100B Bill of Materials
No. per
Position Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2 0 12pF, SMD0805 DNP
C4, C5, C6
2 , C7, C8, 6 100nF, SMD0805 311-1245-2-ND
C9
3 C10, C26 2 470 nF, SMD0805 478-1403-2-ND
4 C11, C12 1 10 uF / 6.3 V SMD0805 C12 DNP
C13, C14,
5 C16, C18, 6 4.7 uF SMD0805
C19, C29
6 D1 1 green LED, SMD0805 P516TR-ND
SAM1029-25-ND
DNP: Headers and receptacles
J1, J2, J3, (Header)
7 0 25-pin header, TH enclosed with kit. Keep vias free of
J4 SAM1213-25-ND
solder:
(Receptacle)
8 J5 1 3-pin header, male, TH
JP3, JP5,
place jumpers on pins 2-3 on JP5,
JP6, JP7,
9 7 3-pin header, male, TH SAM1035-03-ND JP6, JP7, JP8, JP9, JP10 place
JP8, JP9,
jumpers on pins 1-2 on JP3,
JP10
JP1, JP2,
10 3 2-pin header, male, TH SAM1035-02-ND Place jumper on header
JP4
JP11,
11 3 4-pin header, male, TH place jumper on header 1-2
JP12, JP13
12 13 Jumper 15-38-1024-ND See Pos. 9 and Pos. 10 and Pos. 11
14-pin connector, male,
15 JTAG 1 HRP14H-ND
TH
10-pin connector, male,
16 BOOTST 0 "DNP Keep vias free of solder"
TH
17 Q1 0 Crystal DNP: Q1 Keep vias free of solder
21 R3, R7 2 330 Ω, SMD0805 541-330ATR-ND
R1, R2,
R4, R6,
22 2 0 Ohm, SMD0805 541-000ATR-ND DNP: R4, R6, R8, R10, R11
R8, R10,
R11
23 R5 1 47k Ω, SMD0805 541-47000ATR-ND
24 U1 1 Socket: IC357-1004-53N Manuf.: Yamaichi
25 PCB 1 90 x 82 mm 2 layers
Adhesive about 6mm width, 2mm e.g., 3M Bumpons Part
26 4 Apply to corners at bottom side
plastic feet height No. SJ-5302
27 MSP430 2 MSP430F6733IPZ DNP: enclosed with kit, supplied by TI
104
Hardware SLAU278F–May 2009–Revised December 2010
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated