Filter
Top Products
MSP-TS430PZ100
www.ti.com
Table B-22. MSP-TS430PZ100 Bill of Materials
No. per
Pos. Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2, 0 12pF, SMD0805 DNP
DNP: Only
1b C3, C4 0 47pF, SMD0805 recommendation. Check
your crystal spec.
2 C6, C7 1 10uF/10V, Tantal Size B 511-1463-2-ND DNP: C6
3 C5 1 100nF, SMD0805 478-3351-2-ND
4 C8 1 10nF, SMD0805 478-1383-2-ND
5 C9 1 470nF, SMD0805 478-1403-2-ND
6 D1 1 yellow LED, TH, 3mm, T1 511-1251-ND
DNP: Headers and
receptacles enclosed with
J1, J2, J3, SAM1029-25-NDSAM1213-
7 0 25-pin header, TH kit.Keep vias free of
J4 25-ND
solder.: Header:
Receptacle
8 J5 1 3-pin header, male, TH SAM1035-03-ND
9 J6, J7 2 2-pin header, male, TH SAM1035-02-ND place jumper on header
10 2 Jumper 15-38-1024-ND Place on: J6, J7
11 JTAG 1 14-pin connector, male, TH HRP14H-ND
DNP: Keep vias free of
12 BOOTST 0 10-pin connector, male, TH
solder
Q1: Micro Crystal
DNP: Keep vias free of
13 Q1, Q2 0 Crystal MS1V-T1K 32.768kHz,
solder
C(Load) = 12.5pF
14 R3 1 330 Ω, SMD0805 541-330ATR-ND
R1, R2, R4,
15 R8, R9, R10, 3 0 Ω, SMD0805 541-000ATR-ND DNP: R4, R9, R10, R12
R11, R12
16 R5 1 47k Ω, SMD0805 541-47000ATR-ND
"Socket: IC201-1004-008or
17 U1 1 Manuf.: Yamaichi
IC357-1004-53N"
18 PCB 1 82 x 90 mm 2 layers
Adhesive e.g., 3M Bumpons Part No. Apply to corners at bottom
19 4 ~6mm width, 2mm height
Plastic feet SJ-5302 side
DNP: enclosed with kit
20 MSP430 2 MSP430FG4619IPZ
supplied by TI
98
Hardware SLAU278F–May 2009–Revised December 2010
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated