Texas Instruments MSP430 Computer Hardware User Manual


 
www.ti.com
MSP-TS430DL48
Table B-13. MSP-TS430DL48 Bill of Materials
No. per
Pos. Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2 0 12pF, SMD0805 DNP
2 C4, C7 2 10uF/10V, Tantal Size B 511-1463-2-ND
3 C3, C5 2 100nF, SMD0805 478-3351-2-ND
4 C8 1 10nF, SMD0805 478-1383-2-ND
5 D1 1 yellow LED, TH, 3mm, T1 511-1251-ND
DNP: Headers and
receptacles enclosed with
SAM1034-12-NDSAM1212-
6 J1, J2 0 24-pin header, TH kit.Keep vias free of
12-ND
solder.: Header:
Receptacle
Place jumper on header
7 J3, JP1, JP2 2 3-pin header, male, TH SAM1035-03-ND
JP1; Pos 1-2. DNP: JP2
8 J4, J5 2 2-pin header, male, TH SAM1035-02-ND Place jumper on header
9 3 Jumper 15-38-1024-ND Place on: JP1, J4, J5
10 JTAG 1 14-pin connector, male, TH HRP14H-ND
DNP: Keep vias free of
11 BOOTST 0 10-pin connector, male, TH
solder
Micro Crystal MS1V-T1K
DNP: Keep vias free of
12 Q1 0 Crystal 32.768kHz, C(Load) =
solder
12.5pF
13 R3 1 560 Ω, SMD0805 541-560ATR-ND
R4, R6, R7,
14 2 0 Ω, SMD0805 541-000ATR-ND DNP: R6, R7
R12
15 R5 1 47k Ω, SMD0805 541-47000ATR-ND
Socket: IC51-1387
16 U1 1 Manuf.: Yamaichi
KS-15186
17 PCB 1 58 x 66 mm 2 layers
Adhesive e.g., 3M Bumpons Part No. Apply to corners at bottom
18 4 ~6mm width, 2mm height
Plastic feet SJ-5302 side
DNP: Enclosed with kit
19 MSP430 2 MSP430F4270IDL
supplied by TI
69
SLAU278F–May 2009–Revised December 2010 Hardware
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated