Filter
Top Products
Chapter 8: Wi-Fi Wireless LAN
115
entered in Network Key. Letters and numerals that can be
entered are 0-9 and A(a) - F(f).
• Key Index:
This becomes enabled when WEP is selected. Select 1 - 4.
• Enable network access using IEEE 802.1X:
Select to enable 802.1x validation function.
• EAP type:
Select protocol for using 802.1x validation function.
■ TLS (EAP-TLS)
Transport Layer Security (TLS) protocol used by Windows 2000
Server, etc.
■ PEAP
Protected EAP Protocol (PEAP) used by Windows.NET Server
2003, etc.
Please ask your network administrator for further 802.1x validation proce-
dure details.
TMU Traffic Monitoring Utility
TMU Keeps users updated of current WLAN Module's activity status.
Icon Specification
Wireless Communication switch off:
The Wireless Communication Switch (on the bottom of the PDA) is turned
off. Tapping on the
icon gives you a warning message, “Please turn on
Wireless communication switch!” Tap OK to close the dialog box. Turn on
the switch and you will see the
icon turns to or , depending on
the original WLAN Module Power setting.
Wireless Communication power off:
The WLAN module is powered off. Tapping on the icon displays a
“Power Wireless on” message. Tap the link to turn on the Wireless LAN
module power and then the to icon.
Wireless power on:
The WLAN module is powered on. Tapping on the icon displays a
“Power Wireless off” message. Tap the link to turn off the Wireless LAN