Filter
Top Products
Chapter 2: Basic Skills
23
Wireless Communication Switch
1. To enable Wireless module (Wireless LAN/Bluetooth models only),
make sure the Wireless Communication Switch is turned on. (The
default setting is Power Off. Open the switch cover, then slide the
switch to the left to turn the power on.) If the switch is on, a window
will pop up with a list of networks.
2. Select a network. On Windows Mobile 2003, if the switch is turned
on, a window will popup to show the list of existing networks you can
join.
Wireless LED Descriptions
LED indicates the different status:
Hold Switch
When the Hold switch is on, Program Buttons 1 through 5, Cursor Button,
and Scroller will be disabled. The Hold switch icon will be displayed
on the navigation bar. On the contrary, when the Hold switch is off, these
buttons will be enabled again.
LED Status
Off Wireless Communication Switch is turned OFF
Orange Wireless Communication Switch is turned ON
On Off
Wireless Communication Switch
Switch Cover