Toshiba e805 Laptop User Manual


 
Toshiba Pocket PC e800/e805 User’s Guide
198
You can drag the Splitter Bar that divides the two panes up or down, to
adjust the screen distribution above and below the splitter. The Normal
View icon is located at the leftmost side of the Toolbar, as shown below.
You can also use the stylus to pan the slide image in the upper pane to
show the part covered by the lower pane. The splitter position will auto-
matically be remembered across multiple application sessions, freeing
you from having to adjust the splitter position again during the current IA
Presenter session.
To display a different slide in the upper pane, simply tap on the desired
thumbnail in the lower pane, or use the Slide Title Bar (unnamed slides
will be represented by a number in the Slide Title Bar drop-down list). The
lower thumbnail pane in Normal view provides slide navigation. If you
want to select multiple slides for further operations, use the Slide Sorter
view, as explained in the next section.
You can project the currently selected slide to VGA Display by activating
the VGA Slide Toggle command on the View Menu, or by tapping the
VGA Slide Output Toggle icon at the rightmost side of the Toolbar. To
end the projection, select the command again to toggle it off.
Slide Sorter
Slide Sorter view fills the entire application space with either large or small
thumbnails, depending on whether Large Thumbnail or Small Thumb-
nail is active on the View Menu. You can select:
One slide by tapping on it, or
Multiple adjacent slides by dragging your stylus over them, or
If you select Multiple Select Mode on the Edit Menu, you can tap,
drag, or a combination thereof, to select multiple slides that are
separated.
Selected slides will be highlighted by a different border color.
You can project an individual slide to the VGA output by activating the
VGA Slide Toggle command on the View Menu, or by tapping the VGA
Slide Output Toggle icon at the rightmost side of the Toolbar. When you
activate this function:
If one slide is selected at the time you toggle the VGA Slide Output
“on,” that slide will be output to the VGA Display.
If multiple slides happen to be selected, the first selected slide in
the sequence will be output to the VGA Display.
If no slides are selected, there is no change to the current status of
the VGA Display. That is, if an image is already displayed on the
VGA Display, that image remains until you select a slide on your
LCD screen for projection.