Toshiba e805 Laptop User Manual


 
Toshiba Pocket PC e800/e805 User’s Guide
224
Solution Reset the Toshiba Pocket PC, increase the memory, and then
restart Bluetooth Settings.
Remote device search failed due to insufficient memory. Check the
amount of available memory.
Solution Increase the memory and then try the remote device search
again.
Unable to retrieve remote device information.
Solution Display the remote device list again or try the remote device
search again.
Unable to update remote device information.
Solution Depending on communications conditions, Local Device may
not be able to locate the service of the remote device. Try the
remote device search again or reset the Toshiba Pocket PC.
The maximum number of remote devices (255) has been exceeded.
Delete all unneeded remote devices.
Solution Delete unneeded ghost devices and try the remote device
search again. If more than 255 devices are discovered, some
devices will not be displayed.
Unable to delete remote device.
Solution Try deleting the remote device again or reset the Toshiba
Pocket PC.
The device name that you entered exceeds the maximum byte count
of 248 bytes. Enter a different device name.
Cause The name of Local Device exceeds 248 bytes after UTF-8
code conversion.
Solution Enter a name that does not exceed 248 bytes.
The retrieved information contains invalid data.
Cause The device information contains invalid data.
Solution Display the device list again or update the device information
with the remote device search.
Unable to delete remote device due to insufficient memory. Check
the amount of available memory.
Cause There is insufficient memory to delete the device.
Solution Increase the amount of available memory and then try to delete
the device again.
Service list search failed due to insufficient memory. Check the
amount of available memory.
Solution Increase the amount of available memory and then try the ser-
vice list search again.
The maximum number of services (30) has been exceeded.
Cause The Toshiba Pocket PC has detected more than its maximum
number of services (30).
Solution Have the remote device delete unneeded services, and then
update the service list.