Filter
Top Products
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE June 2005 © TOSHIBA TEC
2 - 82
1831 Transfer 1st transfer roller bias
actual value display at
deceleration
(Thick paper 2)
ALL
(black)
187
<0-255>
M Displays the value of
1st transfer roller bias
at deceleration when
the actual printing is
operated.
(The value corrected in
05-1829 is displayed.)
2
1832 Transfer 1st transfer roller bias
actual value display at
deceleration
(Thick paper 3)
ALL
(black)
187
<0-255>
M2
1833 Transfer 1st transfer roller bias
actual value display at
deceleration
(OHP film)
ALL
(black)
187
<0-255>
M2
1836 Transfer 1st transfer roller bias
actual value display in low-
speed color printing
(Plain paper / Thick paper
1)
ALL
(color)
178
<0-255>
M Displays the actual
value of the 1st transfer
roller bias when the
transfers of all colors (Y,
M, C and K) have fin-
ished.
This adjustment is valid
only when the value of
the code 08-497 is “1”
(6 pages/minute).
2
1839-0 Transfer 2nd transfer
roller bias cor-
rection of
leading/trail-
ing edge of
paper
(Tab paper)
Intermedi-
ate level
bias of
trailing
edge
ALL 100
<0-100>
M Corrects the 2nd trans-
fer roller bias output of
leading/trailing edge of
paper (05-1840).
(Correcting factor: %)
14
1839-1 Bias of
leading/
trailing
edge
ALL 90
<0-100>
M14
1840-0 Transfer 2nd transfer roller bias
output adjustment
(Tab paper)
ALL
(black)
153
<0-187>
M As the value decreases,
the 2nd transfer roller
bias output increases
correspondingly.
The adjustment value
becomes effective
when the Setting Mode
(08-544, 549 and 551)
is 0 (invalid).
14
1840-1 ALL
(color)
150
<0-187>
M14
1841-0 Transfer 2nd transfer roller bias
offsetting adjustment
(Tab paper)
ALL
(black)
5
<0-10>
M Sets the offset amount
of 2nd transfer roller
bias.
0: -500V 1: -400V
2: -300V 3: -200V
4: -100V 5: 0V
6: +100V 7: +200V
8: +300V 9: +400V
10: +500V
4
1841-1 ALL
(color)
5
<0-10>
M4
Adjustment mode (05)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e