Filter
Top Products
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE June 2005 © TOSHIBA TEC
2 - 146
986 General Copy function setting PPC 0
<0-1>
SYS Sets the copy function
to be invalid.
0: Valid
1: Invalid
1
988 Paper
feeding
Setting of paper size
switching to 13" LG
ALL 0
<0-2>
SYS 0: Not switched
1: LG→13"LG
2: FOLIO→13"LG
1
995 Mainte-
nance
Equipment number
(serial number) display
ALL 0
<10 dig-
its>
SYS This code can be also
keyed in from the
adjustment mode (05-
976).
10 digits
11
999 Mainte-
nance
FSMS total counter ALL 0
<8 digits>
SYS Refer to values of total
counter.
1
1002 Network Selection of NIC board sta-
tus information
ALL 1
<1-2>
NIC 1: Not printed out
when the copier is
restarted
2: Printed out when
the copier is
restarted
12
1003
Network
Communication speed and
settings of Ethernet
ALL
1
<1-5>
NIC
1: Auto
2: 10MBPS Half
Duplex
3: 10MBPS Full
Duplex
4: 100MBPS Half
Duplex
5: 100MBPS Full
Duplex
12
1006 Network Address Mode ALL 2
<1-3>
NIC 1: Fixed IP address
2: Dynamic IP address
3: Dynamic IP address
without AutoIP
12
1007 Network Domain name ALL - NIC Maximum 96 letters 12
1008 Network IP address ALL - NIC 000.000.000.000-
255.255.255.255
(Default value
000.000.000.000)
12
1009 Network Subnet mask ALL - NIC 000.000.000.000-
255.255.255.255
(Default value
000.000.000.000)
12
1010 Network Gateway ALL - NIC 000.000.000.000-
255.255.255.255
(Default value
000.000.000.000)
12
1011 Network Availability of IPX ALL 1
<1-2>
NIC 1: Available
2: Not available
12
1012 Network Network frame type ALL 1
<1-5>
NIC 1: Automatic
2: IEEE802.3
3: Ethernet II
4: IEEE802.3 SNAP
5: IEEE802.2
12
1014 Network Availability of AppleTalk ALL 1
<1-2>
NIC 1: Available
2: Not available
12
1015 Network Zone setting of AppleTalk ALL * NIC Maximum 32 letters
*: Wildcard character
12
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e
05/11