Toshiba e-STUDIO451c Copier User Manual


 
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE June 2005 © TOSHIBA TEC
2 - 118
481 Paper
feeding
Automatic change of paper
source
PPC 1
<0-2>
SYS Sets whether or not
changing the drawer
automatically to the
other drawer with the
paper of the same size
when paper in the
selected drawer has run
out.
0: OFF
1: ON (Changes to the
drawer with the
same paper direc-
tion and size: ex. A4
to A4)
2: ON (Changes to the
drawer with the
same paper size.
Paper with the dif-
ferent direction is
acceptable as long
as the size is the
same: ex., A4 to A4-
R, LT-R to LT. “1” is
applied when the
staple/holepunch is
specified.)
1
482 Paper
feeding
Feeding retry setting ALL 0
<0-1>
M 0: ON
1: OFF
1
483 Laser Pre-running rotation of
polygonal motor
ALL 0
<0-2>
SYS Sets whether or not
switching the polygonal
motor from the standby
rotation to the normal
rotation when the origi-
nal is set on the RADF
or the platen cover is
opened.
0: Valid (when using
RADF and the origi-
nal is set manually)
1: Invalid
2: Valid (when using
RADF only)
1
484 Laser Polygonal motor rotational
status switching at the Auto
Clear Mode
ALL 0
<0-1>
SYS Sets whether or not
switching the polygonal
motor from the normal
rotation to the standby
rotation at the Auto
Clear Mode.
0: Valid
1: Invalid
1
485 Laser Rotational status of polygo-
nal motor on standby
ALL 0
<0-1>
SYS Sets the rotational sta-
tus of polygonal motor
on standby.
0: Rotated (The rota-
tional speed is set at
08-490.)
1: Stopped
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e