Filter
Top Products
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 139
2
819-0 Develop-
ment
Color auto-
toner sensor
output setting
for initial
developer
material
YALL
(color)
256
<0-1023>
M Sets the target output
value of color auto-
toner sensor to the
sleeve in the auto-toner
control. (This is set
when performing the
automatic adjustment of
auto-toner sensor.)
4
819-1 M ALL
(color)
256
<0-1023>
M4
819-2 C ALL
(color)
256
<0-1023>
M4
820-0 Develop-
ment
Color auto-
toner sensor
output
display for
developer
material
YALL
(color)
-
<0-1023>
M Displays the output
value of the color auto-
toner sensor to the
sleeve in color printing.
4
820-1 M ALL
(color)
-
<0-1023>
M4
820-2 C ALL
(color)
-
<0-1023>
M4
821 Develop-
ment
ON/OFF of the mode for
developer material stabili-
zation
ALL
(color)
0
<0-1>
M Sets whether or not
performing an aging to
stabilize the status of
developer material
when the toner density
is uneven or the toner
charging amount is low-
ered.
0: ON
1: OFF
1
822-0 Develop-
ment
Number of
times the
mode for
developer
material stabi-
lization is per-
formed
YALL
(color)
0
<0-255>
M Displays the number of
times the developer
material stabilization is
performed.
4
822-1 M ALL
(color)
0
<0-255>
M4
822-2 C ALL
(color)
0
<0-255>
M4
823-0 Develop-
ment
Color auto-
toner sensor/
light amount
correction
voltage abnor-
mal detection
YALL
(color)
0
<0-1>
M Displays “1” when the
abnormal output volt-
age is detected for the
color auto-toner sensor
light amount correction.
([CF40] error)
0: Normal
1: Abnormality
detected
4
823-1 M ALL
(color)
0
<0-1>
M4
823-2 C ALL
(color)
0
<0-1>
M4
824-0 Develop-
ment
Color auto-
toner sensor/
toner density
detection volt-
age abnormal
detection
YALL
(color)
0
<0-1>
M Displays “1” when the
abnormal toner density
detection voltage is
detected. ([CF20] error)
0: Normal
1: Abnormality
detected
4
824-1 M ALL
(color)
0
<0-1>
M4
824-2 C ALL
(color)
0
<0-1>
M4
849 Fuser Fusing control switching for
TWD and SAD models
ALL Other
than
TWD and
SAD: 0
TWD and
SAD: 1
<0-1>
M1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e