Filter
Top Products
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE June 2005 © TOSHIBA TEC
2 - 120
544 Image
control
Environment correction
control of 2nd transfer
roller bias
ALL 1
<0-1>
M Sets whether or not cor-
recting the 2nd transfer
roller bias depending on
the environment.
0: Invalid
1: Valid
1
545 Image
control
Transfer belt life correction
of 2nd transfer roller bias
ALL 1
<0-1>
M Sets whether or not cor-
recting the 2nd transfer
roller bias depending on
the transfer belt life.
0: Invalid
1: Valid
1
546 Image
control
2nd transfer roller life cor-
rection of 2nd transfer
roller bias
ALL 1
<0-1>
M Sets whether or not cor-
recting the 2nd transfer
roller bias depending on
the 2nd transfer roller
life.
0: Invalid
1: Valid
1
548 Transfer Setting of 2nd transfer
roller bias table (for each
destination/paper thick-
ness)
ALL EUR:0
UC:1
JPN:2
<0-2>
M 0:80 g/m2 (21.3 lb.)/
EUR
1: 75 g/m2 (20 lb.)/UC
2: 64 g/m2 (17.1 lb.)/
JPN
1
549 Image
control
Image quality control/open-
loop control 1
ALL 1
<0-1>
M Sets whether or not
performing the open-
loop control 1.The
open-loop control 1 is
performed in advance
of the closed-loop con-
trol.
0: Invalid
1: Valid
1
550 Image Default setting of Original
mode
PPC
(black)
0
<0-3>
SYS 0: Text/Photo
1: Photo
2: Text
3: Gray Scale
1
551 Image
control
Image quality control/open-
loop control 2
ALL 1
<0-1>
M Sets whether or not
performing the open-
loop control 2.The
open-loop control 2 is
performed before or
during printing.
0: Invalid
1: Valid
1
552 Image
control
Drum life correction control ALL 1
<0-1>
M Sets whether or not cor-
recting the drum volt-
age depending on the
drum life in open-loop
control.
0: Invalid
1: Valid
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e