Filter
Top Products
B
B-3 Importing density measurements
Example of 1D Status T density for an arbitrary page
This file format is used to specify the Status T density measurements of a user-defined
patch page. The value in the first column is the ink/toner percentage of the patch. The
first percentage must be 0 and the last percentage must be 100. The percentages must
increase in between.
#!EFI 3
# EFI ColorWise 2.0 Data
type: 1DST
# percnt Cyan Magent Yellow Black
0.0000 0.0300 0.0400 0.0200 0.0400
0.3922 0.0600 0.0700 0.0800 0.0700
1.1765 0.1000 0.1000 0.1000 0.1000
(…more data…)
98.0000 1.6700 1.3400 0.8900 1.6700
100.0000 1.7200 1.4300 0.9300 1.7500