Filter
Top Products
2
2-16 Color Calibration
6. Retrieve the measurement page from the copier/printer.
7. Click Measure in the Get Measurements pane.
The Measurement Options dialog box appears.
8. Choose the appropriate options, and then click Start.
Page Type is automatically set to the measurement page type that you printed in step 5.
Use the arrow buttons next to the Clicks Per Patch field to choose the number of
measurements you want to take for each patch on the page. When you choose multiple
clicks, the average value of all measurements taken for the patch is returned to the
GA-1121. Multiple measurements are more accurate, but may take more time.
To hear a confirmation tone each time a measurement is recorded, select the Audio
Feedback option. A single tone indicates a successful measurement; two tones indicate
a measurement error. If you have specified multiple clicks per patch, the tone sounds
after you take the final measurement.
If necessary, choose the appropriate COM port for the ED-100 from the Port menu.