Filter
Top Products
2
2-26 Color Calibration
If you chose the ColorCal method, an alert message appears, asking if you want to
calibrate the copier/printer’s scanner.
10. If you are using ColorCal and want to calibrate the scanner, click Yes.
11. Choose the Input Tray to use for the scanner measurement page and click Print.
Retrieve the scanner measurement page from the copier/printer.
12. Place the Kodak Gray Scale strip, Kodak Color Control Patches strip, and scanner
measurement page in the correct positions on the copier glass for scanner calibration.
Place the Gray Scale strip face down on the copier/printer glass so that it will be
centered along the top edge of the scanner measurement page. Then place the Color
Scale strip face down on the copier glass so it is centered below the Gray Scale strip.
Finally, place the scanner measurement page (second one printed) face down over the
strips.
13. To perform the scanner calibration, click Continue in the ColorCal dialog box that
appears.
After the scanner has been calibrated, another dialog box appears, prompting you to
calibrate the GA-1121.
14. Click Measure in the AutoCal or ColorCal Get Measurements pane.