Filter
Top Products
2
2-9 Using Calibrator
When more than one profile uses the same target, an additional menu called Plot
Against appears in the upper-right corner of the dialog box. It lists all output profiles
that use that same calibration set. Selecting an output profile from this menu displays
the target curves associated with that profile. If each output profile contains a unique
calibration target, the curves displayed also change when you switch profiles.
Restoring default calibration measurements
The GA-1121 is shipped with default calibration measurements. You can use these
measurements to achieve acceptable color without calibration, depending on the copier
you use. If the measurement device you use does not produce acceptable color, you can
easily return to the default measurements.