Filter
Top Products
A
A-1 Color Measurement Instruments
This appendix explains how to set up and calibrate the following color measurement
instruments:
• X-Rite DTP41 automatic scanning spectrophotometer
• X-Rite DTP32 automatic scanning densitometer
Using the X-Rite DTP41 spectrophotometer
ColorWise Pro Tools Calibrator supports the X-Rite DTP41 spectrophotometer, a
device that measures density and color data. The DTP41 communicates directly with
the Calibrator application in ColorWise Pro Tools, sending measurements to the
GA-1121 automatically.
Setting up the DTP41
Before you calibrate the GA-1121, you must connect, configure, and calibrate the
spectrophotometer to prepare for measuring the printed patches. For additional
information about setting up and using the DTP41, see the documentation included
with the instrument.
TO CONNECT THE X-RITE DTP41 TO THE COMPUTER
1. Turn off the computer.
2. Unpack the X-Rite DTP41 and remove the spacer from the measurement page slot.
Appendix A:
Color
Measurement
Instruments