Filter
Top Products
6. TERMINAL FILE PROGRAMMING
EO3-11106
6.18 Read/Reset Report Name Programming
6-93
6.18 Read/Reset Report Name Programming
Read/Reset Report Names are programmed here. A maximum of 12 one-byte characters can be programmed.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] then [Enter].
or
Depress [2].
“2 NAMES” is selected.
Depress the [↓] key nine times then
[Enter] key.
or
Depress [0].
“0 X/Z REPORT NAME” is selected.
Select an X/Z report No. of which report
name is to be programmed with the [↑]
or [↓] key.
The X/Z report name already programmed is displayed.
[Enter]
The ECR enters character input mode.
Input an X/Z report name.
A maximum of 12 one-byte characters are input.
[Enter]
The X/Z report name is entered and printed.
[End]
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.
NOTES:
1. Enter all characters in regular size. In actually printing on reports, they will be printed in all double-sized
characters.
2. As shown in the table on the following pages, the standard program data is preprogrammed (which is auto-
set after a RAM Clear). Therefore, program only the report names that need to be changed.
OPERATION
CONDITION