Filter
Top Products
6. TERMINAL FILE PROGRAMMING
EO3-11106
6.8 Store Name Message Programming
6-55
6.8 Store Name Message Programming
A maximum of 128 characters of Store Name Message (32 characters x 4 lines) to be printed on the receipt is
programmed here.
Prior to the Store Name Message Programming, be sure to select SET status for Address No. 31, Bit No. 5
of the system option.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
Depress [1] or [Enter].
“1 MESSAGES” for various message programming is selected.
Depress [↓] twice then [Enter].
or
Depress [3].
“3 STORE MESSAGE” is selected.
The message already programmed is displayed.
[Enter]
The ECR enters the 1st line message input mode
Input a message in the 1st line.
A maximum of 32 one-byte or 16 two-byte characters are input.
[Enter]
The 1st line message is entered and the programmed data is printed.
[Enter]
The ECR enters the 2nd line message input mode
Input a message in the 2nd line.
A maximum of 32 one-byte or 16 two-byte characters are input.
[Enter]
The 2nd line message is entered and the programmed data is printed.
[Enter]
The ECR enters the 3rd line message input mode
Input a message in the 3rd line.
A maximum of 32 one-byte or 16 two-byte characters are input.
[Enter]
The 3rd line message is entered and the programmed data is printed.
[Enter]
The ECR enters the 4th line message input mode
Input a message in the 4th line.
A maximum of 32 one-byte or 16 two-byte characters are input.
[Enter]
The 4th line message is entered and the programmed data is printed.
[End]
This programming is ended. A long receipt is issued and the display
returns to Main Menu screen.
*: To program a message in a desired line, move the cursor there with
the [
↓
] key then depress the [Enter] key.
*
OPERATION
CONDITION