Filter
Top Products
6. TERMINAL FILE PROGRAMMING
EO3-11106
6.24 PLU Preset Price Setting or Changing
6-121
NOTES:
1. When no price is input then the [Enter] key is depressed, the PLU will be open (i.e. open-price PLU).
2. If inputting a nonexistent PLU code that was not programmed in the PLU Table Programming, this may
cause an error.
3. The [PLU] key depression here results in that the next PLU code (i.e. the currently programmed PLU code
plus 1) is displayed. If it does not exist, the guidance message requiring a PLU code input is displayed.
3) Example
To change the preset prices of PLU Code 0001 as shown below:
PLU Code: 0001
1st Preset Price: It is changed from €1,05 to €3,15.
2nd Preset Price: It is changed from €2,10 to €5,40.
3rd Preset Price: It remains €3,20.
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
twice.
The cursor is moved on to “3 DP/PLU”.
Depress the [3] or [Enter] key.
Depress the [↓] key.
The cursor is moved on to “2 PLU”.
Depress the [2] or [Enter] key.
Depress the [↓] key.
The cursor is moved on to “2 UNIT PRICE”.
Depress the [2] or [Enter] key.
Input 1, then depress the [PLU] key.
PLU Code 0001 is specified.
(continued on the next page)