Filter
Top Products
6. TERMINAL FILE PROGRAMMING
EO3-11106
6.5 System Option Programming
6-25
System Option Table
Standard Bit Set (auto-set by RAM Clear)
ADDRESS NO. CONTENTS
23
4 OPTIONAL FUNCTION II
BIT
NO.
ITEM SELECTIVE STATUS
STANDARD
STATUS
REMARKS
RESET
PRINT all Departments data
*
1
Zero-skip in All
Department and
Department Group
Reports
SET
ZERO-SKIP
Departments/Groups
with no sale will be
skipped in the report.
RESET
PRINT all PLUs data
2
Zero-skip in PLU
Reports
SET
ZERO-SKIP
*
RESET
PRINT all items data
3
Zero-skip on Financial
and Cashier Reports
SET
ZERO-SKIP
*
RESET
ACTIVE
*
4
Cashier feature
SET
NON-ACTIVE
NOTE 1 below
RESET
NOT DISPLAYED
*
5
Cashier No. Display on
Operator Display
SET
DISPLAYED (NOTE 2)
RESET
NOT DISPLAYED
*
6
PLU Price Level Display
on Operator Display
SET
DISPLAYED (NOTE 3)
When both SET or both
RESET, Department
No. will be displayed.
RESET
*
7
-- vacant --
SET
RESET
*
8
-- vacant --
SET
NOTE 1: If SET, the cashier feature is not active as the registering operation is possible without cashier sign-ON.
• Cashier read and reset operations are not possible. Doing so may cause an error.
• Cashier signing operation (inputting 4-digit numeric values then [LOG]) in REG mode may cause an error.
• Cashier name is not printed on the validation slip.
• The cashier name portion on the receipt and the journal will be blank. Prior to changing this bit status from RESET to SET,
the cashier daily/GT reset should be performed to clear the cashier memory. If the bit status is changed without performing
the reset operation, the cashier memory data will not be guaranteed.
NOTE 2: If SET, the Cashier No. of the signed-ON cashier is always displayed on the Department Code position (2 digits). Even when a
department entry is performed, the Cashier No. is displayed instead of the department code.
NOTE 3: If SET, the PLU Price Level is always displayed on the second leftmost digit of the 7-segment Numeric display.
-- Address No. 5 is vacant. --