Filter
Top Products
6. TERMINAL FILE PROGRAMMING
EO3-11106
6.33 Hourly Range Table Setting
6-142
6.33 Hourly Range Table Setting
By setting a maximum of 24 terms per day, sales data control for each term can be performed.
After Hourly Range Reset
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] four times then [Enter].
or
Depress [5].
“5 BASIC” is selected.
Depress [↓] three times then [Enter].
or
Depress [4].
“4 HOURLY RANGE” is selected.
Depress [1] or [Enter].
“1 SETTING” is selected.
Input a numeric value for TIME01, then
depress [Enter].
A 4-digit numeric value is input with the 24 hour time system
(HHMM)
Input a numeric value for TIME24, then
depress [Enter].
A 4-digit numeric value is input with the 24 hour time system
(HHMM)
[End]
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
NOTES:
1. A maximum of 24 terms can be set per day.
2. To partially or entirely change the hourly range table once set, do the entire setting operation over again.
3. Do not set a term across 24:00, such as “23:00 to 1:00”.
4. After performing a RAM Clear, the hourly range table is set with hourly terms in the range of 7:00 to 23:00.
OPERATION
CONDITION