Filter
Top Products
6. TERMINAL FILE PROGRAMMING
EO3-11106
6.13 Salesperson Name Programming
6-69
3) Example
To program “White” on Salesperson Code 01:
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
The cursor is moved on to “2 NAMES”.
Depress the [2] or [Enter] key.
“2 NAMES” is selected.
Depress the [↓] key four times.
The cursor is moved on to
”5 SALESPERSON NAME”.
Depress the [5] or [Enter] key.
”5 SALESPERSON NAME” is selected.
Depress the [Enter] key.
(Salesperson 01 is selected.)
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
The [C] key depression clears the
salesperson name already
programmed.
The salesperson name already programmed
is displayed.
Input a desired name.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[W] [A/a] [h] [I] [t] [e] [Enter]
The [Enter] key depression results in
that the input name is entered and
displayed.
When the [Enter] key is depressed, the
programmed data is printed.
(continued on the next page)