Filter
Top Products
6. TERMINAL FILE PROGRAMMING
EO3-11106
6.14 Financial Report Item Name Programming
6-72
3) Example
To program “NET GT” instead of “NET GT” for Item Code 2 (NET GT) all in double-sized characters.
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
The cursor is moved on to “2 NAMES”.
Depress the [2] or [Enter] key.
“2 NAMES” is selected.
Depress the [↓] key five times.
The cursor is moved on to
”6 FINANCIAL ITM NAME”.
Depress the [6] or [Enter] key.
”6 FINANCIAL ITM NAME” is selected.
Depress the [↓] key, then depress the
[Enter] key.
(Item code 2 (“NET GT”) is selected.)
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
The [C] key depression clears the
financial item name already
programmed.
The financial item name already
programmed is displayed.
Input a desired name.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[Dbl] [N] [E] [T] [→] [G] [T] [Enter]
The [Enter] key depression results in
that the input name is entered and
displayed.
When the [Enter] key is depressed, the
programmed data is printed.
(continued on the next page)