Filter
Top Products
6. TERMINAL FILE PROGRAMMING
EO3-11106
6.5 System Option Programming
6-18
6.5 System Option Programming
This operation is used to set the ECR’s basic features and selective functions to meet the requirement of the
market and your user.
This programming operation is performed in SET mode or BLIND mode.
In SET mode, you can select a desired menu item on the LCD display. Address No. 1 to Address No. 29 are
programmable. In BLIND mode, you can directly enter a desired Address No. on the keyboard. All system
options from Address No. 1 to Address No. 49 are programmable.
After Financial Daily Reset
For Dealer System Options: Mode Lock: SET
(Address No. 1 to No. 29)
For Dealer System Options: Mode Lock: BLIND
(Address No. 1 to No. 49)
Programming in SET mode
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] five times then [Enter].
or
Depress [6].
“6 OTHER” is selected.
Depress [↓] then [Enter].
or
Depress [2].
“2 SYSTEM OPTION” is selected.
Select a desired Address No.
with the [↑] or [↓] key.
(Selectable from Address No. 1 to Address No.29.)
[Enter]
The Bit Numbers currently programmed are displayed on the 7-
segment Numeric display.
Move the cursor on to a desired bit No.
with the [↓] key.
Choose bit status with the [←] or [→]
key.
Every time the [←] or [→] key is depressed, N and Y are displayed
alternately. N and Y indicate RESET and SET statuses,
respectively.
[Enter]
The selected Address No. setting is entered.
The Bit Numbers with SET status are displayed on the 7-segment
Numeric display.
[End]
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.
OPERATION
CONDITION