Filter
Top Products
3.32 SETUP 3 Tests and Diagnostics
5. Boot Priority
(a) Boot Priority
Use this option to set the priority for booting of the computer and the priority
for the HDD for booting.
FDD→HDD→CD-ROM→LAN: The computer looks for bootable files in
the following order: FDD, HDD, CD-
ROM (*1) and LAN
HDD→CD-ROM→LAN→FDD: The computer looks for bootable files in
the following order: HDD, CD-ROM,
LAN and FDD.
FDD→CD-ROM→LAN→HDD: The computer looks for bootable files in
the following order: FDD, CD-ROM,
LAN and HDD.
CD-ROM→LAN→HDD→FDD: The computer looks for bootable files in
the following order: CD-ROM, LAN,
HDD and FDD.
CD-ROM→LAN→FDD→HDD: The computer looks for bootable files in
the following order: CD-ROM, LAN,
FDD and HDD.
HDD→FDD→CD-ROM→LAN: The computer looks for bootable files in
the following order: HDD, FDD, CD-
ROM and LAN. (Default)
(*1) CD-ROM refers to a Optical Disk Drive.
(b) HDD Priority
Use this option to set the booting priority from HDD.
Built in HDD1→Built in HDD2 (Default)
: detecting boot-command from Built in HDD1
Built in HDD2→Built in HDD1
: detecting boot-command from Built in HDD2
NOTE: When 2nd HDD is not installed, this option does not appear in the menu.
If the boot command can not be detected from the prior HDD, booting
target changes to other devices. (Not detected from the other one)
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE Sets to PXE protocol. (Default)
RPL Sets to RPL protocol.
3-110 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)