Filter
Top Products
4.23 GMCH heat sink 4 Replacement Procedures
4.23 GMCH heat sink
Removing the GMCH heat sink
The following describes the procedure for removing the GMCH heat sink (See Figure 4-36).
1. Remove the following screws securing the GMCH heat sink.
M2.0x3.0S S-THIN FLAT BIND screw x2
2. Remove the GMCH heat sink.
M2.0x3.0S S-THIN FLAT BIND
GMCH heat sink
Figure 4-36 Removing the GMCH heat sink
Installing the GMCH heat sink
The following describes the procedure for installing the GMCH heat sink (See Figure 4-36).
1. Install the GMCH heat sink.
NOTE: For details on applying the silicon grease, refer to Installing the CPU.
2. Secure the GMCH heat sink with the following screws.
M2.0x3.0S S-THIN FLAT BIND screw x2
4-58 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)