Filter
Top Products
3 Tests and Diagnostics 3.32 SETUP
NOTE: When starting the computer in Standby or Hibernation, the last configuration is
remembered. If data does not appear on the display you are using after starting
in Standby or Hibernation, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external display, both the internal LCD and the external display.
When an external display, which does not support SVGA mode is connected and
“LCD+AnalogRGB”
is selected, the external display is not displayed.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled Enables the LCD display stretch feature. (Default)
Disabled Disables the LCD display stretch feature.
(c) TV Type
This option allows you to select the type of TV.
NTSC (Japan) TV in Japanese system
NTSC (US) TV in the U.S. system
PAL (S-Video) TV in Europe and China system
525p (480p,D2) High Definition Television with 480 progressive scan
750p (720p,D4) High Definition Television with 720 progressive scan
1125i (1080i,D3) High Definition Television with 1080 interlace
525i (480i,D1) High Definition Television with 480 interlace
PAL (SCART) TV in Europe system
11. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled Enables the touch pad. (Default)
Disabled Disables the touch pad.
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 3-115