Filter
Top Products
Appendix J Maintenance of TOSHIBA RAID J.3Operation of Independent utility
Execute the following procedures to see the drive log in the independent utility.
1. Put on the cursor on [Physical Drive] in [Main Menu] and press [Enter] key.
2. Put on the cursor on [View Drive Log] and press [Enter] key.
3. Select drive that you want to display the log in [Physical Drive] at the lower of
display with a cursor key and press [Enter] key.
4. The drive log is displayed. Press [PageUp] or [PageDown] key to scroll the
drive log upward or downward.
5. To change log displayed, put the cursor on [Change Port] and press [Enter] key.
6. Select Drive log port to be displayed and [Own/Redundant]. For Example, [Own]
log means the drive log of Port-0 own, [Redundant] log of Port-0 means the
backup copy of the drive log of Port-1.
7. To switch the upper and lower of drive log frame, press [Tab] key. The selected
frame is displayed more lightly than the other frame.
8. To move to the drive log wit arbitrary log number, put the cursor on the [Go to
Event] and press [Enter] key. Next, input the log number you want to move to
and press [Enter] key.
The 7,168 logs from the latest is recorded in detail. For the older than that, only
identification ID is recorded.
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] J-25