Filter
Top Products
4 Replacement Procedures 4.8 Bottom cover assembly
9. Turn over the computer upside down.
10. Disconnect the speaker cable (L) from the connector CN6002 under the insulator of
HDD-2 slot.
11. Disconnect the AV-IN harness from the connector CN5660 in the memory module
slot.
AV-IN harness
CN5660
CN6002
Speaker cable (R)
Figure 4-12 Disconnecting the cables
12. Remove the following screws securing the bottom cover assembly.
M2.0x4.0B BIND screw x1 (Described as "4 or LH"
or in the figure)
M2.0x4.0B LH STICK screw x1
M2.5x6.0B FLAT BIND screw x3 (Described as "6" in the figure)
M2.5x8.0B FLAT BIND screw x9 (Described as "8" in the figure)
M2.5x16.0B FLAT BIND screw x6 (Described as "16" in the figure)
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-25