Filter
Top Products
4 Replacement Procedures 4.38 Hinge
4.38 Hinge
Removing the hinge
The following describes the procedure for removing the hinge (See Figure 4-57).
1. Remove the following screws securing the hinge (L) and remove the hinge (L).
M2.5x6.0C PSP TIGHT screw x2
2. Remove the following screws securing the hinge (R) and remove the hinge (R).
M2.5x6.0B FLAT BIND screw x2
Hinge (R)
M2.5x6.0B FLAT BIND
M2.5x6.0C PSP TIGHT
Hinge (L)
Figure 4-57 Removing the hinge
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-87