Filter
Top Products
4 Replacement Procedures 4.34 LCD harness
4.34 LCD harness
Removing the LCD harness
The following describes the procedure for removing LCD harness (See Figure 4-50 to 4-52).
1. Remove the following screw securing the LCD harness holder (cover assembly side)
and remove the LCD harness holder from the cover assembly.
M2.5x4.0B FLAT BIND screw x1
2. Remove the following screw securing the hinge cap (L) and remove the hinge rear
cap (L) from the display assembly.
M2.0x4.0B FLAT BIND screw x1
M2.5x4.0B FLAT BIND
LCD harness holder
M2.5x4.0B FLAT BIND
Hinge rear cap (L)
Figure 4-50 Removing the hinge rear cap (L)
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-79